30 CM Louvera

30 CM Louvera is Mark Decor's wide-profile louver wall panel collection created around a bold 300 mm / 30 CM width. The wider proportion improves visual continuity across large ...

30 CM Louvera
30 CM Louvera
30 CM Louvera
MFT-3001
Louvers

MFT-3001

MFT-3002
Louvers

MFT-3002

MFT-3003
Louvers

MFT-3003

MFT-3004
Louvers

MFT-3004

MFT-3005
Louvers

MFT-3005

MFT-3006
Louvers

MFT-3006

MFT-3007
Louvers

MFT-3007

MFT-3008
Louvers

MFT-3008

MFT-3009
Louvers

MFT-3009

MFT-3010
Louvers

MFT-3010

MFT-3011
Louvers

MFT-3011

MFT-3012
Louvers

MFT-3012

MFT-3013
Louvers

MFT-3013

MFT-3014
Louvers

MFT-3014

MFT-3015
Louvers

MFT-3015

MFT-3016
Louvers

MFT-3016

MFT-3017
Louvers

MFT-3017

MFT-3018
Louvers

MFT-3018

MFT-3019
Louvers

MFT-3019

MFT-3020
Louvers

MFT-3020

MFT-3021
Louvers

MFT-3021

MFT-3022
Louvers

MFT-3022

MFT-3023
Louvers

MFT-3023

MFT-3024
Louvers

MFT-3024

Guide

30 CM Louvera Guide

30 CM Louvera: Wide-Format Wall Louvers with a 300 mm Face

30 CM Louvera by Mark Decor is distinguished by its wide nominal face rather than a narrow repeated strip. The existing PIM describes a 300 × 2900 × 10 mm panel format: 300 mm wide, 2900 mm long and 10 mm thick. That breadth changes the way a wall reads. Instead of many narrow divisions, the design can present larger decorative fields while retaining the ordered vertical structure associated with wall louvers.

The range is documented as 24 designs, from MFT-3001 to MFT-3024. Its strongest search intent is therefore “30 cm wide wall panels” or “wide-profile louvers,” not the generic term for every kind of decorative louver. Designers choosing a broad feature wall should begin by comparing the visual proportion of 300 mm Louvera with a narrower system before settling on the colour.

Why Wide Profiles Change the Perception of a Wall

Panel width influences the visual rhythm of a finished elevation. A 300 mm face creates fewer repeating divisions across a given wall width than a narrower 120 mm format, assuming comparable coverage conditions. This can make a large surface look calmer and more continuous, even when the finish has texture. It can also make the boundary between panels more important, so careful alignment and neat edges deserve attention.

Wide profiles can work well behind a long sofa, along a reception wall or around a broad media feature where the designer wants a composed plane. On smaller walls, the same breadth may result in only a few visible modules. That can be elegant, but it requires a considered starting point and treatment of the last partial panel.

The 300 × 2900 × 10 mm Panel Specification

The catalogue-derived PIM content lists 300 mm width, 2900 mm length and 10 mm thickness for 30 CM Louvera. The material is described as high-grade PVC. These are technical facts for the series, not a reason to target a generic material phrase as its primary page keyword. The more distinctive point is how a wide face combines with the long vertical format for large decorative wall elevations.

Before calculating coverage, ask for current effective-width information, joint details and installation requirements. A nominal 300 mm face does not by itself tell you the exact net width of a completed installation. Measure wall height, note beam projections and plan cutting and termination details. Avoid assuming that the panel can be fitted to any facade or wet area simply because it is described as decorative cladding.

Designing Expansive Living-Room Features

An expansive living-room wall can benefit from 30 CM Louvera when the intention is visual continuity. Broad panel sections can sit behind a long sofa, a sideboard or an integrated cabinet wall. Choose a restrained finish when the furniture is already detailed; select a stronger mineral, wood-look or decorative treatment when the wall itself should become the principal design feature.

The relationship to furniture width is especially important with a wide panel. An accent that ends halfway behind a sofa can look accidental. Sketch the wall treatment against the furniture elevation and compare a full-wall option with a centred field. Use physical samples to judge whether the wider surface reads as calm or oversized in the actual room.

Wide TV Walls with Fewer Visual Breaks

A TV unit benefits from a balanced relationship between the screen, console and surrounding wall. The wide-format Louvera face can provide a calmer decorative field with relatively broad modules around these elements. Where a darker finish is chosen, the television may visually settle into the wall; in lighter finishes, the panel can create subtle structure around the media equipment.

Do not place heavy mounts directly into an unspecified decorative face without the proper structural backing. Electrical wiring, ventilation, device access and shelf supports should be planned before installation. Consider the way panel joints relate to the screen edges and cabinet lines; wide modules can make small alignment errors more noticeable.

Feature Walls for Reception and Commercial Spaces

Reception areas, showrooms and selected hospitality interiors often include large uninterrupted walls. 30 CM Louvera can be considered where those surfaces need a structured decorative finish with fewer repeated divisions. A wide panel can visually support a large sign or counter, especially when the surrounding wall remains quiet. Designers should decide whether the brand identity or the decorative finish is the primary focal point.

Public and commercial locations also demand technical diligence. Confirm the substrate, fixing method, routine cleaning needs and any relevant project regulations. The fact that a panel is pictured in an interior does not establish compliance with all fire, impact or environmental requirements. Surface selection and technical specification should be approved together.

Colour, Finish and the Broad-Panel Effect

The PIM describes 24 decorative designs for 30 CM Louvera. The broad face can change how any pattern appears: large printed veining may read as a continuous composition, while fine details may become less prominent from across the room. A light design can help a large wall remain open and understated; a darker wood or mineral effect can make the surface more prominent.

When reviewing samples, look at the complete face and join, not only a small central patch of colour. Test the finish against the actual furniture and flooring. A wide dark panel may require softer lighting; a highly patterned finish may need a simpler ceiling and cabinet treatment. Do not describe an appearance as real stone, solid timber or metal unless the product data specifically supports that material.

Long Vertical Proportions and the 2900 mm Length

Louvera’s 2900 mm nominal length provides an option for taller elevations, subject to the actual site and available production specification. This can support a strong vertical composition behind high furniture or along a double-volume-looking wall section without introducing unnecessary horizontal divisions when dimensions suit the project.

Where the wall height is below the panel length, plan the cut line carefully. Where height exceeds the panel, decide how the design will handle joining or whether another construction treatment is needed. The wider face makes the top and bottom termination particularly visible; coordinate those details with cornices, skirting and any framing trims before the installer starts.

Features Listed for 30 CM Louvera

The supplied collection material lists features such as borer-free performance, termite resistance, water resistance, no formaldehyde and environmentally friendly positioning. These should be understood as catalogue claims relating to the product range, not as independent certifications for the installed wall. No unsupported fire rating, structural capacity, outdoor durability or universal chemical resistance should be added to the public content.

Moisture resistance of a panel cannot guarantee that wall joints, backing construction or adhesives remain protected from water. Technical suitability depends on the complete installation and site conditions. Ask for current recommendations before installing in spaces exposed to persistent humidity, direct sunlight, heat or other demanding conditions.

How Many 30 CM Louvera Panels Will a Wall Need?

Start with a drawing that shows the complete clear wall width at several heights. Mark openings, outlets, the proposed starting point and each visible end condition. Divide the elevation according to actual effective installed coverage, not simply the nominal 300 mm profile width. The installer should confirm allowance for joining, trimming, waste and any necessary accessories.

A symmetrical scheme may need a partial unit at each end, while an asymmetrical scheme may deliberately start from a cabinet edge. There is no universal preferred solution. A quick sketch at 300 mm intervals can reveal whether the intended design feels balanced before material is ordered. Measure again before cutting because existing rooms are not always perfectly square.

When to Select 30 CM Louvera Instead of Narrower Louvers

Choose Louvera when wide-format visual continuity is the main design goal. Infinite is more appropriate when paired patterned and linear profiles are essential. Volume - 5 suits a finish-led selection, Volume - 6 centres on a tall 120 mm profile, and Volume - 7 provides a separate 120 mm design collection. Louvera’s difference is not a claim that wide panels are better for every room; it is the distinct 300 mm proportion.

For an especially narrow wall, a smaller profile could provide more detailed rhythm. For a broad accent behind a counter, a wider face might appear calmer. Make the decision by comparing scaled elevations and samples. Each Mark Decor series has its own specifications and product codes, and the correct one should be selected on that basis.

Final Checks Before Specifying a Wide Wall Panel

Confirm the Louvera design code, current technical sheet, actual available lengths, colour sample and installation guidance. Review how the panel will meet skirting, ceilings, corner returns and cabinet faces. Ensure substrate and adhesive requirements are understood, and do not assume a generally available wall-panel accessory will match the chosen profile.

An effective wide-format wall is the result of thoughtful proportions, not just fast coverage. Mark Decor’s 30 CM Louvera should be considered as one identifiable design system with its own visual advantages and constraints. This specific page exists to answer wide-panel questions, leaving broad comparisons of all Louvers to the category and finish-specific questions to the other series.

Frequently Asked Questions

It is a wide-format Mark Decor decorative wall-louver collection distinguished by its nominal 300 mm face. The broader profile creates fewer visual divisions across many large-wall layouts compared with narrow-profile systems.

The existing PIM specifies 300 × 2900 × 10 mm: 300 mm wide, 2900 mm long and 10 mm thick. Confirm net installed coverage and current production dimensions before quantity calculations.

The supplied PIM describes 24 designs, numbered MFT-3001 through MFT-3024. Current stock, available finishes and exact code details should be checked with Mark Decor before placing an order.

Its wide face can create a calmer, more continuous visual rhythm on a broad surface. Whether it is preferable depends on wall width, furniture proportions and the desired pattern. A narrower louver may suit a small or more detailed area better.

It can form a decorative backdrop when layout and technical installation are appropriate. Plan equipment support, ventilation, cable access and panel-edge positions before fitting the wall treatment.

The supplied PIM identifies high-grade PVC. This is a technical construction statement, not the primary SEO keyword. Check the current technical sheet for details relevant to the project and the chosen design.

The supplied collection description lists water resistance, but a wall assembly also depends on substrate, adhesive, joints and terminations. A product claim does not establish waterproofing of the entire installed surface.

A wide decorative louver feature can be considered for an interior reception wall, subject to the project’s fixing, cleaning, fire and other applicable requirements. Choose the finish in conjunction with signage and furniture elevations.

30 CM Louvera has a nominal 300 mm face, while Volume - 6 is listed with a 120 mm profile. Both collection records describe a 2900 mm length, but the width changes the repeated rhythm and the product systems should not be treated as interchangeable.

Measure the full wall elevation, subtract relevant openings, plan the starting edge and confirm the actual installed coverage per panel. Discuss cuts, corners, trims and waste with the installer before finalising the quantity.